Shires Maintenance

Post Reply
BurckhardtS
Posts: 247
Joined: Sun Mar 25, 2018 6:57 pm

Shires Maintenance

Post by BurckhardtS »

Hey all,

I'm moving on from my Edwards T396A soon to a Shires setup that I should be getting within the next couple weeks. When it comes to maintaining my Edwards, I use LaTromba T2 on the valve and Hetman Linkage on the linkages, and then usually Trombotine on the slide. If I'm feeling lazy, sometimes I'll use YamaSnot.

Does anyone know what Shires slides prefer, and what kind of maintenance I should be doing on the axial flow valve? Also any other information on maintaining them?

Thanks!
Shires - 7YM, TX, Axial, TW47 - Greg Black NY 1
YSL354 - XT LN106, C+, D3
User avatar
BGuttman
Posts: 6354
Joined: Thu Mar 22, 2018 7:19 am
Location: Cow Hampshire

Re: Shires Maintenance

Post by BGuttman »

What you are using now should work fine.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
User avatar
Burgerbob
Posts: 5125
Joined: Mon Apr 23, 2018 8:10 pm
Location: LA
Contact:

Re: Shires Maintenance

Post by Burgerbob »

I'd recommend hetman or ultra pure on the valve (and heavier of the same brand for the ball joints). Yamasnot works great on Shires slides.
Aidan Ritchie, LA area player and teacher
BurckhardtS
Posts: 247
Joined: Sun Mar 25, 2018 6:57 pm

Re: Shires Maintenance

Post by BurckhardtS »

Any reason against the T2 for the inside of the valve? Also what about the oiling intervals? I usually do it once a week and twice a week for the linkages.
Shires - 7YM, TX, Axial, TW47 - Greg Black NY 1
YSL354 - XT LN106, C+, D3
User avatar
Burgerbob
Posts: 5125
Joined: Mon Apr 23, 2018 8:10 pm
Location: LA
Contact:

Re: Shires Maintenance

Post by Burgerbob »

Ultra pure is just great and doesn't leave any residue. I would use light rotor for the inside of the valve.
Aidan Ritchie, LA area player and teacher
Ndwood
Posts: 67
Joined: Fri May 11, 2018 9:33 am

Re: Shires Maintenance

Post by Ndwood »

As per the Shires website [hereletmegooglethatforyou]:

https://static1.squarespace.com/static/ ... enance.pdf
User avatar
Mv2541
Posts: 557
Joined: Thu Mar 29, 2018 10:07 am
Location: New Jersey

Re: Shires Maintenance

Post by Mv2541 »

I use Hetmann 1 for the valve applied daily along with 15 for the joints and 7 in the slides. I think they ship new with a similar combo.
Software Developer/Educator
JP Rath 236 - XT L101 C+/AS
Bach LT16M - XT L101 C+/D3
Bach 36BO - XT L101 E/E4
Edwards T396 - XT L101 F+/G8
Courtois 502 - LB L114 L/L8
Post Reply

Return to “Maintenance”