TromboneChat

JLivi wrote: ↑Mon Aug 13, 2018 1:28 pm I was just curious what people do to write/record music in their home studio?

I'll get it started. Here's my setup:

Logic X
Focusrite 2i4 scarlett
Yamaha 88 weighted key keyboard as my MIDI controller (P-95?)
Just purchased an Akai MPX8 to start creating better drum beats, hopefully
AT 4050 (large condenser) to record trombone & any vocals

I think that covers it. I have a pedal board that I mess with as well that has an analog mixer, octave pedal (sub and octave up) and a wah pedal.

Savio wrote: ↑Tue Aug 14, 2018 6:30 am I read a lot in that home recording site, got some tips there. Like the preamp is important, mic placement and the room is also important. I tried different things and found a way that works ok for me. Just for fun. But the more I read in that site, the more I understood I don't know much. So I just found one way that works. I have used different mics, apex 205, shure 58, AKG 1000s, and also a Samson. Dynamic mics, short placement, condensator mics, longer distance. Add a little reverb, and adjust volume level with a limiter. That's it. I found out its best to do it simple. I sometimes tried all the effects, but it doesn't work good for me. I believe that's for pro people. And often the software effects are bad in cheap software. I have Cubase from 2005. So simple is best result for me. Wow, many words with little sense. Anyway I was told the focusrite preamp is important for my use. I also use a Zoom with good result. Puuh, I need a coffee after all this words....

Leif

cozzagiorgi wrote: ↑Tue Aug 14, 2018 6:50 am

Savio wrote: ↑Tue Aug 14, 2018 6:30 am I read a lot in that home recording site, got some tips there. Like the preamp is important, mic placement and the room is also important. I tried different things and found a way that works ok for me. Just for fun. But the more I read in that site, the more I understood I don't know much. So I just found one way that works. I have used different mics, apex 205, shure 58, AKG 1000s, and also a Samson. Dynamic mics, short placement, condensator mics, longer distance. Add a little reverb, and adjust volume level with a limiter. That's it. I found out its best to do it simple. I sometimes tried all the effects, but it doesn't work good for me. I believe that's for pro people. And often the software effects are bad in cheap software. I have Cubase from 2005. So simple is best result for me. Wow, many words with little sense. Anyway I was told the focusrite preamp is important for my use. I also use a Zoom with good result. Puuh, I need a coffee after all this words....

Leif

Savio, I want to pick your brain a little more.

The Focusrite pre you use, is it a Scarlett 2i2? A little red box? What mic do you use with it?

Wich Zoom do you use and how do you use it to get good results? I have a Zoom H2N (old I know) and never got really good results with it. How do you place it?

cozzagiorgi wrote: ↑Tue Aug 14, 2018 6:50 am The Focusrite pre you use, is it a Scarlett 2i2? A little red box? What mic do you use with it?

harrisonreed wrote: ↑Fri Aug 17, 2018 12:22 pm I think the 2i2 is perfect only if you are doing a single stereo recording, or you are only recording a single instrument at a time. I love mine, but probably should have gotten the 4 input version.

Geordie wrote: ↑Fri Apr 03, 2020 6:09 pm Have just started home recording (today!) with a Zoom H4n Pro. Plan is to use pre-recorded stereo backing tracks mainly and add solo lines. Appreciate the importance of distance between horn and device mic. I know you can set recording levels prior to recording on the device. Wondering how you can see the levels AND play the horn to set the levels if you use the two mics on the recording unit. I suppose an external mic is needed with the device in proximity to my playing position so I can set the levels. Or is it just trial and error. Have been recommended to try a pair of Rode M5 - any thoughts? Would my Shure clip on wireless mic be any good for the job?
FWIW I intend to use the Cubase LE supplied with the product. All advice gratefully received.

harrisonreed wrote: ↑Fri Apr 03, 2020 6:17 pm There is no reason to worry about the levels. You need to test out where you start to clip levels playing very loud, by checking a few test recordings even if you can't see the levels while you are recording. Then back off the gain a decent amount. Then you won't clip anything ever.

If you record in 24 bit or 32-float, you just need a healthy signal, and even at your loudest you don't have to have the signal come close to 0Db. You can adjust levels in your DAW without any data loss that a human ear could detect.