Bass trombone made by Weril
-
- Posts: 708
- Joined: Sun Oct 06, 2019 11:03 am
Bass trombone made by Weril
do anyone know anything on this model GG292L Gagliardi ? made by Weril price ? also is this a proffesional model is 9 1/2 gold brass bell, independent valve open wrap .3 lead pipe 562 bore?
-
- Posts: 357
- Joined: Fri Mar 30, 2018 7:03 am
- Location: Copenhagen, Denmark
- Contact:
Re: Bass trombone made by Weril
Yes. I owned one, and was happy to sell it again. Heavy and cluncky, bad response. You work hard on this one for medicore results.
Also on owned a Chinese Yamaha 613H clone, then sold by Wessex Tuba, which was better in both build, response, intonation, and alignment of partials.
You get most value for your money if you find a used Yamaha, Conn, Bach. ... etc.
Also on owned a Chinese Yamaha 613H clone, then sold by Wessex Tuba, which was better in both build, response, intonation, and alignment of partials.
You get most value for your money if you find a used Yamaha, Conn, Bach. ... etc.
-
- Posts: 129
- Joined: Sun Oct 09, 2022 5:03 pm
- Location: Fort Wayne, IN
Re: Bass trombone made by Weril
Don't spend your money on a Weril-made instrument. They are poorly built, difficult to get repair parts for, and generally just not good instruments.
David Paul - Brass Repair/Manufacture, O'Malley Brass
-
- Posts: 3
- Joined: Sun May 12, 2024 10:07 am
Re: Bass trombone made by Weril
What about the Wessex bass trombones? They look preatty nice and cost just a fraction of a Bach og Conn, but are they any good?
I'm assuming they won't hold up against a good used Bach 50, but those are hard to come by, so I'm considering buying a Wessex for fun and doubling in the future
I'm assuming they won't hold up against a good used Bach 50, but those are hard to come by, so I'm considering buying a Wessex for fun and doubling in the future
-
- Posts: 357
- Joined: Fri Mar 30, 2018 7:03 am
- Location: Copenhagen, Denmark
- Contact:
Re: Bass trombone made by Weril
^^^ to repeat myself:
Also on owned a Chinese Yamaha 613H clone, then sold by Wessex Tuba, which was better in both build, response, intonation, and alignment of partials.
Also on owned a Chinese Yamaha 613H clone, then sold by Wessex Tuba, which was better in both build, response, intonation, and alignment of partials.
-
- Posts: 251
- Joined: Thu Oct 25, 2018 5:11 am
- Location: Somerset, UK
Re: Bass trombone made by Weril
Also check out the John Packer JP333 Rath Bb/F/Gb/D bass trombone. Cheaper, better and available! My friend has just bought one and loves it. It works in both Big Band and orchestral settings.
Cheers
Stewbones43
Cheers
Stewbones43
Conn 36H(Pitched in D/A)
Reynolds Medalist
B&H Sessionair
Besson 10-10
Conn 74H
Yamaha YSL-641 with Yamaha Custom Slide
Conn 88H Gen II with Conn SL4747 Slide
Besson Academy 409
Rath/Holton/Benge Bb/F/G or Gb/Eb or D Independent Bass
Reynolds Medalist
B&H Sessionair
Besson 10-10
Conn 74H
Yamaha YSL-641 with Yamaha Custom Slide
Conn 88H Gen II with Conn SL4747 Slide
Besson Academy 409
Rath/Holton/Benge Bb/F/G or Gb/Eb or D Independent Bass
-
- Posts: 379
- Joined: Sun Mar 25, 2018 1:10 pm
- Location: Pennsylvania
Re: Bass trombone made by Weril
I remember a neighbor who sold a Pontiac Bonneville that had a sign on the windshield that said "Wednesday Car". It intimated that by the middle of the week the workforce was "back in the swing" of doing what Detroit could very often do well in achieving what was ---- to build a great car. Mondays and Fridays were to be avoided. I don't think that there is much difference between cars and trombones except that you drive one and you blow the other ! In fact , with all the variables involved it should be a no-brainer to test drive [audition] the unit in question. I've encountered trombones with no leadpipe installed [Monday horn ?] and cars with no grease on the wheel bearings [Friday car ?]. And then ----- it has to fit the peculiarities of whomever is going to be its custodian for the next several decades. It is NOT a whole lot different than properly choosing your human companion for the next few decades, either ! No other's opinion matters more than YOURS ! Keep up the enthusiasm !
-
- Posts: 3967
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: Bass trombone made by Weril
Gee, thanks for your abundant insight!tanstaafl49 wrote: ↑Thu May 23, 2024 9:12 amI have actually attempted a Wessex bass trombone and also was pleased by its top quality and also playability. The noise is abundant as well as full-bodied plus the slide activity is smooth. While not on par with a premium-duty Bachelor's Degree or Conn it's a wonderful worth. Perfect for those intending to attempt bass trombone without damaging the financial institution.ENBjorn wrote: ↑Fri May 17, 2024 10:47 am What about the Wessex bass trombones? They look preatty nice and cost just a fraction of a Bach og Conn, but are they any good?
I'm assuming they won't hold up against a good used Bach 50, but those are hard to come by, so I'm considering buying a Wessex for fun and doubling in the future
Mods?
- JohnL
- Posts: 1886
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Bass trombone made by Weril
Already reported. Just waiting for one of the mods to act on it.Posaunus wrote: ↑Thu May 23, 2024 3:07 pmGee, thanks for your abundant insight!tanstaafl49 wrote: ↑Thu May 23, 2024 9:12 am
I have actually attempted a Wessex bass trombone and also was pleased by its top quality and also playability. The noise is abundant as well as full-bodied plus the slide activity is smooth. While not on par with a premium-duty Bachelor's Degree or Conn it's a wonderful worth. Perfect for those intending to attempt bass trombone without damaging the financial institution.
Mods?
- BGuttman
- Posts: 6354
- Joined: Thu Mar 22, 2018 7:19 am
- Location: Cow Hampshire
Re: Bass trombone made by Weril
Done.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
Merrimack Valley Philharmonic Orchestra
"Almost Professional"