Page 1 of 1
XO 1242 dependent bass suggestions
Posted: Wed Dec 29, 2021 11:53 am
by Jpechroer
I acquired a Jupiter xo 1242 bell section and valves and it’s missing the main slide. I was curious if anyone may know what may be compatible with its locking nut and taper.
Re: XO 1242 dependent bass suggestions
Posted: Wed Dec 29, 2021 11:59 am
by Burgerbob
I'm not sure there is anything except the XO slides.
Re: XO 1242 dependent bass suggestions
Posted: Wed Dec 29, 2021 4:19 pm
by Jpechroer
I have a Chinese bone slide that’s a .550 and the taper fits but the threads are different.
Re: XO 1242 dependent bass suggestions
Posted: Wed Dec 29, 2021 7:08 pm
by sacfxdx
There are a couple XO artists on the forum. They may be able to provide a contact for a slide. Probably a dealer reference.
Good luck.
Re: XO 1242 dependent bass suggestions
Posted: Thu Dec 30, 2021 8:23 am
by Matt K
You might also consider swapping out the slide receiver for something more "standard". A tech can typically handle that for not such a bad price and would let you get any used slide if parts are available (e.g. anything still in production) such that you swap out the slide receiver for whatever accepts that slide.
Re: XO 1242 dependent bass suggestions
Posted: Thu Dec 30, 2021 9:11 am
by hyperbolica
Matt K wrote: ↑Thu Dec 30, 2021 8:23 am
You might also consider swapping out the slide receiver for something more "standard". A tech can typically handle that for not such a bad price and would let you get any used slide if parts are available (e.g. anything still in production) such that you swap out the slide receiver for whatever accepts that slide.
That comes with a caveat. I learned this the hard way once. Not all slides are equal length, even if they fit. A slide that's a little short is manageable, but one that's a little long is not.
Re: XO 1242 dependent bass suggestions
Posted: Sat Jan 01, 2022 6:47 am
by WGWTR180
hyperbolica wrote: ↑Thu Dec 30, 2021 9:11 am
Matt K wrote: ↑Thu Dec 30, 2021 8:23 am
You might also consider swapping out the slide receiver for something more "standard". A tech can typically handle that for not such a bad price and would let you get any used slide if parts are available (e.g. anything still in production) such that you swap out the slide receiver for whatever accepts that slide.
That comes with a caveat. I learned this the hard way once. Not all slides are equal length, even if they fit. A slide that's a little short is manageable, but one that's a little long is not.
True! Just stick with an XO slide.
Re: XO 1242 dependent bass suggestions
Posted: Sat Jan 01, 2022 7:02 am
by Burgerbob
I tried my student's horn this week. It will fit Edwards/bach slides, ish, and the threads are totally different. You'd have to get a different lock nut and receiver, as they don't go in quite far enough.
Re: XO 1242 dependent bass suggestions
Posted: Sat Jan 01, 2022 10:06 am
by Crazy4Tbone86
I haven't seen any Jupiter XO basses recently.....then again, I have seen a lot less of everything because of the pandemic. Anyway, do the newest Jupiters still have that unique system for locking the threads in place in the removable leadpipes?