Slide/bell angles
-
- Posts: 50
- Joined: Thu Nov 19, 2020 11:51 am
Slide/bell angles
Posted in the tangent section because it's irrelevant, but I'm curious nonetheless.
- BGuttman
- Posts: 6354
- Joined: Thu Mar 22, 2018 7:19 am
- Location: Cow Hampshire
Re: Slide/bell angles
The angle can vary some.
Most of my attachment horns go at slightly less than a right angle (would be called "acute").
Some small bores with really narrow slides may go at more than a right angle (would be called "obtuse").
Most of my attachment horns go at slightly less than a right angle (would be called "acute").
Some small bores with really narrow slides may go at more than a right angle (would be called "obtuse").
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
- Burgerbob
- Posts: 5125
- Joined: Mon Apr 23, 2018 8:10 pm
- Location: LA
- Contact:
Re: Slide/bell angles
For no good reason other than aesthetics, I use a 90 degree angle on all trombones.
Aidan Ritchie, LA area player and teacher
-
- Posts: 1879
- Joined: Mon Mar 02, 2020 6:18 am
Re: Slide/bell angles
I used a right angle on my old bass but that was because i put a ring on the slide to hold it easier, now it a little less than a 90 degree. On my 3B i use a little wider than 90 and i still have to put all three fingers on the cork barrel to be comfortable
- spencercarran
- Posts: 640
- Joined: Sat Oct 17, 2020 1:02 pm
- Location: Chicago
Re: Slide/bell angles
Right angle on every trombone I use, regardless of size.
-
- Posts: 1447
- Joined: Tue Jan 14, 2020 10:52 am
Re: Slide/bell angles
Years ago, I remember reading part of someone's dissertation on the impacts (perceived by performers and listeners in blind audition format) of several variables in trombone equipment set-up. A couple of the variables were things like adding a doughnut weight to the mouthpiece and altering the angle of the slide versus the bell section.
It was about 25 years ago, so I cannot remember much of the article. I think that the listeners were all trombone graduate students and the performers ranged from high school students to professionals. I also cannot remember the 3 or 4 other things that were altered on the instruments....possibly weight added to the bell was one of them?!?
If I recall correctly, a small portion of the performers felt that opening up the angle on their slide made their sound more open and broad. However, the listeners behind the wall observed no change in tone color. Thus, it was concluded that any perceived correlation between slide angle and tone quality was likely a placebo effect.
I found the document entertaining because of the many discussions I had with my peers in college about how and why that set up their equipment certain ways. I think it really comes down to....if it feels good and works for you, do it!
It was about 25 years ago, so I cannot remember much of the article. I think that the listeners were all trombone graduate students and the performers ranged from high school students to professionals. I also cannot remember the 3 or 4 other things that were altered on the instruments....possibly weight added to the bell was one of them?!?
If I recall correctly, a small portion of the performers felt that opening up the angle on their slide made their sound more open and broad. However, the listeners behind the wall observed no change in tone color. Thus, it was concluded that any perceived correlation between slide angle and tone quality was likely a placebo effect.
I found the document entertaining because of the many discussions I had with my peers in college about how and why that set up their equipment certain ways. I think it really comes down to....if it feels good and works for you, do it!
Brian D. Hinkley - Player, Teacher, Technician and Trombone Enthusiast
- LeTromboniste
- Posts: 1185
- Joined: Wed Apr 11, 2018 7:22 am
- Location: Sion, CH
Re: Slide/bell angles
On modern trombone it was a right angle or very slightly more acute (maybe 80-85°). Since I've started playing historical trombones, I use I think a 60-70° angle. First of all because my grip is different (and doesn't involve the bell stay at all), and with the grip I use, the neckpipe goes closer to my neck and so the bell is slightly rotated away from my face. The more acute angle compensates for that and brings the bell back up a little bit. And also because my instruments are all friction fit. The bigger the angle, the further away from the tenon the centre of gravity moves, and the more tork is put on it from the weight of the bell, and the more the bell wants to slip off the slide. Having your bell get loose and droop down to your shoulder while you're in the middle of playing extended runs of fast notes (it's always when it happens), especially during a concert, is really, really annoying! I find that the shallower angle almost completely solved that.
Maximilien Brisson
www.maximilienbrisson.com
Lecturer for baroque trombone,
Hfk Bremen/University of the Arts Bremen
www.maximilienbrisson.com
Lecturer for baroque trombone,
Hfk Bremen/University of the Arts Bremen
-
- Posts: 376
- Joined: Wed Jul 18, 2018 9:55 pm
- Location: North Dakota
Re: Slide/bell angles
It varies.
During a piece we played yesterday, it started at 90 degrees, was close to 110 by measure 16, and was chasing 135 by the trio. But for six measures of rest, it would have reached 180!
During a piece we played yesterday, it started at 90 degrees, was close to 110 by measure 16, and was chasing 135 by the trio. But for six measures of rest, it would have reached 180!
- Oslide
- Posts: 178
- Joined: Tue Apr 03, 2018 9:13 am
- Location: Switzerland, BL
Re: Slide/bell angles
Changing the angle between bell and slide will also slightly change the angle by which the sound from the bell hits your ears. There will be a difference. Whether you care to hear it is up to you, but I don't think it's just "placebo".Crazy4Tbone86 wrote: ↑Thu May 13, 2021 8:19 am --- snippet ---
If I recall correctly, a small portion of the performers felt that opening up the angle on their slide made their sound more open and broad. However, the listeners behind the wall observed no change in tone color. Thus, it was concluded that any perceived correlation between slide angle and tone quality was likely a placebo effect.
Ceterum censeo to fetch All of TTF
- spencercarran
- Posts: 640
- Joined: Sat Oct 17, 2020 1:02 pm
- Location: Chicago
Re: Slide/bell angles
Might change how it hits the player's ear, but won't make a difference to the audience.Oslide wrote: ↑Thu May 13, 2021 3:04 pmChanging the angle between bell and slide will also slightly change the angle by which the sound from the bell hits your ears. There will be a difference. Whether you care to hear it is up to you, but I don't think it's just "placebo".Crazy4Tbone86 wrote: ↑Thu May 13, 2021 8:19 am --- snippet ---
If I recall correctly, a small portion of the performers felt that opening up the angle on their slide made their sound more open and broad. However, the listeners behind the wall observed no change in tone color. Thus, it was concluded that any perceived correlation between slide angle and tone quality was likely a placebo effect.
-
- Posts: 240
- Joined: Mon May 28, 2018 10:00 pm
Re: Slide/bell angles
I've been toying with the angle on my small bore. It does feel somewhat comfortable at a slightly obtuse angle, though i typically use a right angle. However, would the bell stay at that slight angle or end up going wider on the gig...?
Bass is right angle only; it does not work with my hand and the 2nd valve lever any other way.
The large tenor with F attachment is likely to stay at a right angle, at least for now. With the trigger behind the bell brace, any other angle is awkward, though better than the bass.
Bass is right angle only; it does not work with my hand and the 2nd valve lever any other way.
The large tenor with F attachment is likely to stay at a right angle, at least for now. With the trigger behind the bell brace, any other angle is awkward, though better than the bass.
Kevin Afflerbach
'57 Conn 6H, Warburton 9M/9D/T3★
'62 Holton 168, Bach 5GL
Getzen 1052FD Eterna, Pickett 1.5S
F. Schmidt 2103 BBb Tuba, Laskey 30G
Wessex Tubas TE360P Bombino, Perantucci PT-84-S
John Packer JP274MKII Euphonium, Robert Tucci RT-7C
'57 Conn 6H, Warburton 9M/9D/T3★
'62 Holton 168, Bach 5GL
Getzen 1052FD Eterna, Pickett 1.5S
F. Schmidt 2103 BBb Tuba, Laskey 30G
Wessex Tubas TE360P Bombino, Perantucci PT-84-S
John Packer JP274MKII Euphonium, Robert Tucci RT-7C
- Cotboneman
- Posts: 202
- Joined: Fri Jul 27, 2018 4:16 pm
- Location: Tucson, AZ
- Contact:
Re: Slide/bell angles
My head is too big for anything less than a 90 degree angle LOL
- harrisonreed
- Posts: 5222
- Joined: Fri Aug 17, 2018 12:18 pm
- Location: Fort Riley, Kansas
- Contact:
Re: Slide/bell angles
I use a gauge every time I put my trombone together, to ensure it is exactly 83.74⁰ every time.
Serious answer, though - I have started reducing the angle because I noticed that the weight distribution changed a bit, and it let the mouthpiece angle onto my face better.
Serious answer, though - I have started reducing the angle because I noticed that the weight distribution changed a bit, and it let the mouthpiece angle onto my face better.
-
- Posts: 393
- Joined: Mon Jan 07, 2019 8:56 pm
Re: Slide/bell angles
That would be 83° 44' 24". I'll have to try it myself. I will be trying different angles to see if they produce changes in comfort and/or ease/efficiency of playing.harrisonreed wrote: ↑Fri May 14, 2021 4:07 pm I use a gauge every time I put my trombone together, to ensure it is exactly 83.74⁰ every time.
Serious answer, though - I have started reducing the angle because I noticed that the weight distribution changed a bit, and it let the mouthpiece angle onto my face better.
Current instruments:
Olds Studio trombone, 3 trumpets, 1 flugelhorn, 1 cornet, 1 shofar, 1 keyboard
Previous trombones:
Selmer Bundy, Marceau
Olds Studio trombone, 3 trumpets, 1 flugelhorn, 1 cornet, 1 shofar, 1 keyboard
Previous trombones:
Selmer Bundy, Marceau
-
- Posts: 61
- Joined: Fri Mar 23, 2018 4:22 am
- Location: Edinburgh
Re: Slide/bell angles
I try to stick to 90 degrees or very slightly more acute.
Ronnie
Ronnie
Shires Tru-Bore (Bb/F/Gb/D)
Bach Stradivarius 42 (unlacquered bell)
Excel Bb/F/Gb/D (Chinese made Yamaha YBL-613G clone)
Bach Stradivarius 42 (unlacquered bell)
Excel Bb/F/Gb/D (Chinese made Yamaha YBL-613G clone)
- thecoast
- Posts: 21
- Joined: Wed Mar 03, 2021 9:53 pm
Re: Slide/bell angles
Very interesting and useful discussion. Very helpful. Thanks for the answer to questions I didn’t need to ask.
---Lu Acosta
-
- Posts: 666
- Joined: Tue Nov 02, 2021 11:44 am
Re: Slide/bell angles
No worries: Question of the year has already been taken.
Richard Smith
Wichita, Kansas
Wichita, Kansas
-
- Posts: 200
- Joined: Mon Jun 11, 2018 5:51 am
- Location: Georgia, USA
Re: Slide/bell angles
No votes for “significantly more than a right angle.”
I’m a “slightly acute” guy, but there was one person I marched with in college who did use a very obtuse angle. He played a Benge 165F, and the bell almost rested on his shoulder!
I’m a “slightly acute” guy, but there was one person I marched with in college who did use a very obtuse angle. He played a Benge 165F, and the bell almost rested on his shoulder!
-
- Posts: 84
- Joined: Thu Apr 26, 2018 6:31 am
- Location: Perth, Western Australia
Re: Slide/bell angles
As someone here (may have been the old forum) said in response to this difficult issue - the right angle is the right angle.
The uniform of the band I play with includes a hat with a wide brim.
It's great when playing outdoors in summer however the bell section bumps the back of the hat up which sends the front down and impairs one's forward vision. Not so good when marching.
We get around that by flattening the angle out so the bell section is more or less parallel with the shoulder.
The uniform of the band I play with includes a hat with a wide brim.
It's great when playing outdoors in summer however the bell section bumps the back of the hat up which sends the front down and impairs one's forward vision. Not so good when marching.
We get around that by flattening the angle out so the bell section is more or less parallel with the shoulder.
- tylerdold
- Posts: 6
- Joined: Sun Jun 26, 2022 12:05 am
- Location: New Jersey
Re: Slide/bell angles
Any time I hold anyone else's horn, I just have to adjust the angle to be about 75-80°, the valves are just so uncomfortable to me otherwise
- nicboneman
- Posts: 4
- Joined: Tue Jul 05, 2022 3:35 pm
Re: Slide/bell angles
On tenor, a bit less than 90°; on my bass that has a 10 1/2 in bell, there is about a half inch between the top slide tube and the bell, so quite a bit of an acute angle. I find the weight of the bell is more centered so it’s easier for the wrist.