Hi,
Does anyone know of a good reputable repairman in the Maryland area that can fix a 60's 8H slide with some red rot on the sleeves? Also, looking for a good music store in Maryland (preferably near Bowie Maryland) where i could try out some Bach 42's and 88H.
Thanks
slide repair
-
- Posts: 158
- Joined: Wed Sep 05, 2018 4:42 pm
-
- Posts: 98
- Joined: Sun Jul 22, 2018 12:18 pm
Re: slide repair
For trying horns Baltimore Brass. Both New and Used in the store no appointment needed.
As for the slide repair, are you saying just the outer slide over sleeves have red rot? If not, can you clarify?
As for the slide repair, are you saying just the outer slide over sleeves have red rot? If not, can you clarify?
-
- Posts: 158
- Joined: Wed Sep 05, 2018 4:42 pm
Re: slide repair
Thanks for the info on Baltimore Brass.
The inner slide has rough reddish spots on the sleeve. The outer seems ok.
Thanks
The inner slide has rough reddish spots on the sleeve. The outer seems ok.
Thanks
- BGuttman
- Posts: 6359
- Joined: Thu Mar 22, 2018 7:19 am
- Location: Cow Hampshire
Re: slide repair
You can deal with the rough reddish spots on the inner slide stocking. Here's what I do:
Polish the reddish spots with a wadding like Nevr-Dull. Or you can use very fine steel wool like 0000 (4 nought). Do not use green Scotch Brite (320 grit) it's too coarse. If you can find a very fine Scotch Brite (1200 grit or so) that would work as well. If you use a polish, clean off any residue with alcohol. I like 90% isopropyl rubbing alcohol. The spots should become bright brass color.
Place some slide cream over the spots and rub it in. Now do your normal slide prep. You should be OK for a few months at which time you need to polish the spots again.
I have a slide that had a bare spot in the stocking for some 20 years and it still is nice and smooth.
Polish the reddish spots with a wadding like Nevr-Dull. Or you can use very fine steel wool like 0000 (4 nought). Do not use green Scotch Brite (320 grit) it's too coarse. If you can find a very fine Scotch Brite (1200 grit or so) that would work as well. If you use a polish, clean off any residue with alcohol. I like 90% isopropyl rubbing alcohol. The spots should become bright brass color.
Place some slide cream over the spots and rub it in. Now do your normal slide prep. You should be OK for a few months at which time you need to polish the spots again.
I have a slide that had a bare spot in the stocking for some 20 years and it still is nice and smooth.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
-
- Posts: 82
- Joined: Sat Apr 21, 2018 6:11 pm
Re: slide repair
Pete Francis at Baltimore Brass