Quote from: sterb225 on Oct 04, 2017, 06:35PMI have been chasing the outer reaches of the possible range for years and have recently come to the realization that 'less is more'. Simply put, all that strength built working towards the higher reaches can be too much of a good thing with the larger stronger muscles at the outer edges of the aperture overtaking and choking off the inner portions that need to stay softer and compliant to produce the buzz. I consciously try to do the least possible amount of work as I head up the scale, keeping the buzz from getting choked off and dying and not letting the air speed up tot the point that I need to press or pinch ... if its not coming easy I must be doing something out of whack. All that said, the reliability of that dreadful area that has the D in it is great improved.
Right on the money!
The problem for very many students have is just what is described above.
The airflow must be permitted to pass the lips, to many players are squezing the lips together.
Of course the "tuning Bb" should not be against the bumper.
There are three positions to chose for high D, 1. 2,5. and 4.
If the embouchure isn´t ready for the tone, no positions will work. So keep practising.
If you have the chops and want to find the 1,5 position (it is very delicat) try the following, it may help, if it does not just forget it.
Play an A on the fifth line for two beats, then legat to D above the staff on 4 pos. Do it again but now the D is on 1pos. Move up one octave, the same positions. Now try A - D the D now in the middle of 1 and 4 positions, what I call 2,5 (it is a thad closer to 2) .
Now play F# (on #3 pos.) to D on 2,5. Then work on A F# D, F# A D many times until you find the spot.
If you don´t care to find it you can always play it on 1 pos. if your Bb is out from the bumper enough.
I like to play the high tones on the mpc, making sure that the embouchure is not to tight. If you have a reason to not do that just forget it.