Safe Cleaning supplies
-
- Posts: 116
- Joined: Tue Dec 19, 2023 9:18 pm
Safe Cleaning supplies
What can I clean my horn with that is not going to damage it?
What should I absolutely avoid?
What should I absolutely avoid?
- BGuttman
- Posts: 6354
- Joined: Thu Mar 22, 2018 7:19 am
- Location: Cow Hampshire
Re: Safe Cleaning supplies
Definitely avoid? Mineral acids like hydrochloric, sulfuric, nitric, muriatic, etc. Weaker acids like oxalic or acetic can be used but still should be well rinsed.
Don't use abrasive cleaners on your horn; they will wear through the metal. One time cleanings may be OK, but constant use of such materials will get you in the long run. As was mentioned in another thread, don't use ammonia based cleaners on brass instruments -- it will even penetrate lacquer.
If you are really not sure what to use, find a lacquer cleaner I got some King stuff that was 50 years old and used it a couple of times.
Don't use abrasive cleaners on your horn; they will wear through the metal. One time cleanings may be OK, but constant use of such materials will get you in the long run. As was mentioned in another thread, don't use ammonia based cleaners on brass instruments -- it will even penetrate lacquer.
If you are really not sure what to use, find a lacquer cleaner I got some King stuff that was 50 years old and used it a couple of times.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
- muschem
- Posts: 246
- Joined: Sun Jan 17, 2021 10:16 am
- Location: Austin, Texas
- Contact:
Re: Safe Cleaning supplies
I recall hearing this before, but I didn't know why. There was some good information in that other thread:
Many of the commonly available brass polishes are ammonia-based. I knew about the lacquer issue, but for unlacquered instruments, it wasn't even on my radar to avoid ammonia... it sure is now! I'm looking for good ammonia-free products to use. Does anyone know if Rolite brass/copper polish contains ammonia? I couldn't find an MSDS or ingredients list on their site to confirm one way or another, so I reached out via their contact form. I'd be interested in hearing what everyone uses instead. Hope's was also mentioned on the other thread.hornbuilder wrote: ↑Wed Oct 16, 2024 5:57 pm Ammonia induces micro stress fractures in brass. I know Conn-Selmer will not allow "any" chemical in their plant that includes ammonia in its ingredients
-
- Posts: 1028
- Joined: Wed May 02, 2018 9:20 pm
Re: Safe Cleaning supplies
They use Rolite to polish the inside of slide tubes in the Getzen shop. Can't tell you what's in it.
For bare brass, there is a product called Miracle Cloth, which has citrus oils and waxes in it. It works quite well for shining up bare brass. It also protects and slows down tarnish.
For bare brass, there is a product called Miracle Cloth, which has citrus oils and waxes in it. It works quite well for shining up bare brass. It also protects and slows down tarnish.
You do not have the required permissions to view the files attached to this post.
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
-
- Posts: 3967
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: Safe Cleaning supplies
I use Eagle One Nanowax spray wax (nano-sized carnauba wax particles that fill microscratches and provide shine and water repellency). Purchased at auto parts store - originally formulated for auto finishes, but recommended by my cabinet maker - for cabinet and furniture protection. It works great on these wood surfaces. Supposedly will also keep glass shower doors spot-free.
I have used it as a protective spray on my trombones' exterior lacquered (or unlacquered) surfaces. Seems to work well; no visible harm. Surfaces look great. But the product may no longer be marketed. [Problems with nano-particles? ]
I have used it as a protective spray on my trombones' exterior lacquered (or unlacquered) surfaces. Seems to work well; no visible harm. Surfaces look great. But the product may no longer be marketed. [Problems with nano-particles? ]
- ghmerrill
- Posts: 999
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Safe Cleaning supplies
One simple answer: Blue Dawn dish detergent.
You can branch out from there as you gain experience and some knowledge about cleaning agents and their effects on brass (a la the other comments here). But Dawn is pretty much the bottom line gold standard.
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
-
- Posts: 116
- Joined: Tue Dec 19, 2023 9:18 pm
Re: Safe Cleaning supplies
My current cleaners are:
Dawn dish detergent
Rubbing alcohol
Simple green
Hopes brass polish
Anything alarming in that list?
My list of harmful cleaners include:
Anything with ammonia (stress fractures)
Hydrogen peroxide (takes zinc out of brass)
Dawn dish detergent
Rubbing alcohol
Simple green
Hopes brass polish
Anything alarming in that list?
My list of harmful cleaners include:
Anything with ammonia (stress fractures)
Hydrogen peroxide (takes zinc out of brass)
- ghmerrill
- Posts: 999
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Safe Cleaning supplies
^
Yeah, that's my list except for the brass polish. Love the Simple Green.
Yeah, that's my list except for the brass polish. Love the Simple Green.
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
-
- Posts: 59
- Joined: Wed Oct 04, 2023 10:57 am
- ghmerrill
- Posts: 999
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Safe Cleaning supplies
It's a good solvent for some things, and I often use it as a quick swab for my slide in between thorough cleanings. But another primary use of it is as a desiccant. After I clean something with water (including a trombone slide or a black powder gun barrel), I'll use 90% isopropyl alcohol in it to remove residual water before I store it.
Last edited by ghmerrill on Sat Oct 19, 2024 10:42 am, edited 1 time in total.
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
-
- Posts: 495
- Joined: Sat Sep 22, 2018 12:48 pm
- Location: Central Jersey
Re: Safe Cleaning supplies
This, if you can find it. I found it at Dollar Tree several months back, but have not seen it recently.
I know it doesn't specifically say brass, but it works really well. I find it as effective as Wright's to polish the inside of the outers, and it is a little easier to use - I wet the polishing cloth first, otherwise it may be too abrasive.
It also works great to polish tuning slides. I haven't tried it, but I would think that it will remove tarnish on an unlaquered horn without scratching it.
And - NO AMMONIA!
I know it doesn't specifically say brass, but it works really well. I find it as effective as Wright's to polish the inside of the outers, and it is a little easier to use - I wet the polishing cloth first, otherwise it may be too abrasive.
It also works great to polish tuning slides. I haven't tried it, but I would think that it will remove tarnish on an unlaquered horn without scratching it.
And - NO AMMONIA!
You do not have the required permissions to view the files attached to this post.
- ghmerrill
- Posts: 999
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Safe Cleaning supplies
There are some funny things in that description. For example, what is Koolin? I suspect this is a misprint for Kaolin -- in which case that would be the "abrasive" that's referred to. I don't think I'd want even a "mild abrasive" in a general cleaner. Detergents (in general, without additives) don't contain abrasives; and neither Dawn detergent nor Simple Green are abrasive. Otherwise, the only cleaning substances in it appear to be the hydroxyethylcellulose and the sodium stearate. The warning not to use it on a "warm" surface is a little puzzling. How warm? Why not?
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
-
- Posts: 495
- Joined: Sat Sep 22, 2018 12:48 pm
- Location: Central Jersey
Re: Safe Cleaning supplies
Gary, good questions and I don't have an answer. I like that there is no ammonia, for the reasons listed elsewhere.
I've only used it on the inside of the outer slide tubes and the tuning slides in place of Wrights when I ran out. I don't think it is any more abrasive than the Wright's and it seems easier to rinse out. It also smells better!
I still needed to play and clean the slides multiple times before the cleaning cloths came out clean, but I found the results to be comparable.
I've only used it on the inside of the outer slide tubes and the tuning slides in place of Wrights when I ran out. I don't think it is any more abrasive than the Wright's and it seems easier to rinse out. It also smells better!
I still needed to play and clean the slides multiple times before the cleaning cloths came out clean, but I found the results to be comparable.
Last edited by Mamaposaune on Sat Oct 19, 2024 6:41 pm, edited 1 time in total.
-
- Posts: 1615
- Joined: Tue Jul 02, 2019 9:06 am
- Location: New Jersey
- Contact:
Re: Safe Cleaning supplies
It does say Kaolin, they just use a font where the "a" is very similar to the "o".ghmerrill wrote: ↑Sat Oct 19, 2024 11:02 am There are some funny things in that description. For example, what is Koolin? I suspect this is a misprint for Kaolin -- in which case that would be the "abrasive" that's referred to. I don't think I'd want even a "mild abrasive" in a general cleaner. Detergents (in general, without additives) don't contain abrasives; and neither Dawn detergent nor Simple Green are abrasive. Otherwise, the only cleaning substances in it appear to be the hydroxyethylcellulose and the sodium stearate. The warning not to use it on a "warm" surface is a little puzzling. How warm? Why not?
David S. - daveyboy37 from TTF
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
-
- Posts: 158
- Joined: Wed Sep 05, 2018 4:42 pm
Re: Safe Cleaning supplies
I primarily use Dawn and finish with Pledge Lemon Spray Polish, buffed with a super soft cloth.
-
- Posts: 1028
- Joined: Wed May 02, 2018 9:20 pm
Re: Safe Cleaning supplies
Note.
It's great that folks are cleaning their horns with detergent. But keep in mind that detergent only works on organic compounds, like grease and food particles. It doesn't do anything to remove limescale or oxidation. That is where your friendly Professional Band Instrument Repair Tech comes in handy!!
It's great that folks are cleaning their horns with detergent. But keep in mind that detergent only works on organic compounds, like grease and food particles. It doesn't do anything to remove limescale or oxidation. That is where your friendly Professional Band Instrument Repair Tech comes in handy!!
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
-
- Posts: 747
- Joined: Thu Mar 22, 2018 7:40 am
- Location: My Dungeon of Hell....Actually Texas
- Contact:
Re: Safe Cleaning supplies
EXACTLY!!!!
Plain citrus furniture polish is plenty good for lacquered horns, use with a soft terrycloth or microfiber cloth.
Plain water should be enough to rinse out the big chunks from the leadpipe and upper slide tube
Swab your outer hand slide tubes with cheesecloth
Anything more should go to a tech.
Eric Edwards
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
- ghmerrill
- Posts: 999
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Safe Cleaning supplies
While there's some sense to polishing a lacquered horn if it's "of a certain age", I don't think there's much sense at all to polishing the more modern baked-on epoxy finishes -- unless by "polish" you mean "wipe off with water/alcohol and a microfiber cloth." That said, I have, on occasion "polished" my lacquered instruments -- but not exactly with a "polish" and so not exactly "polished" in the usual sense. The only thing I use (and I can't remember the last time I did it) is Nu Finish. But you'll need to look up the properties it has, what it accomplishes, and why it's not really a "polish".
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
-
- Posts: 747
- Joined: Thu Mar 22, 2018 7:40 am
- Location: My Dungeon of Hell....Actually Texas
- Contact:
Re: Safe Cleaning supplies
I agree that nothing will "polish" lacquered surfaces, even the so-labeled "lacquer polish" cloths.ghmerrill wrote: ↑Mon Oct 21, 2024 4:10 pmWhile there's some sense to polishing a lacquered horn if it's "of a certain age", I don't think there's much sense at all to polishing the more modern baked-on epoxy finishes -- unless by "polish" you mean "wipe off with water/alcohol and a microfiber cloth." That said, I have, on occasion "polished" my lacquered instruments -- but not exactly with a "polish" and so not exactly "polished" in the usual sense. The only thing I use (and I can't remember the last time I did it) is Nu Finish. But you'll need to look up the properties it has, what it accomplishes, and why it's not really a "polish".
For me, it's more of a cleaner to remove lighter water residues, finger prints and dust.
Might offer a bit of protection for unlacquered brass.
Eric Edwards
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles