Clean those inners

Post Reply
CharlieB
Posts: 368
Joined: Thu Mar 29, 2018 7:51 pm
Location: Maryland

Clean those inners

Post by CharlieB »

I had been playing the same (very good) trombone for eighteen years.
Then the intonation got quirky and the partials wouldn't stack.
No damage, no air leaks, and only this horn. ???????? Frustrating.
It was my fault.
I had been meticulous about cleaning the outer slide and crook, and the outside of the inners, but lately (dunno why) I had not cleaned the interiors of the inner slide tubes.
Sighting through them, they looked pretty good.......misleading.
After a good cleaning and polishing, the problems went away.
Amazing how much problem was caused by such a small amount of schmutz.
Nolankberk
Posts: 42
Joined: Wed Sep 06, 2023 9:53 pm
Location: CA

Re: Clean those inners

Post by Nolankberk »

I was having intonation issues until I cleaned mine out as well, it gets nasty in there
tbonesullivan
Posts: 1615
Joined: Tue Jul 02, 2019 9:06 am
Location: New Jersey
Contact:

Re: Clean those inners

Post by tbonesullivan »

I run a Brass Saver brush through my inners at least once a week. "stuff" can build up very quickly.
David S. - daveyboy37 from TTF
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
User avatar
ssking2b
Posts: 406
Joined: Sat Sep 29, 2018 1:34 pm
Location: Richmond, VA metropolitan area
Contact:

Re: Clean those inners

Post by ssking2b »

I run a Brass Saver thru mine every day. I don't like any build up.
===============================================
XO Brass Artist - http://www.pjonestrombone.com
===============================================
User avatar
ghmerrill
Posts: 999
Joined: Mon Apr 02, 2018 4:41 pm
Location: Central North Carolina

Re: Clean those inners

Post by ghmerrill »

Just look down those inners every once in a while and you'll start cleaning your slide a lot more frequently. :lol: From my perspective, they almost never look "pretty good" unless I've just cleaned them. :roll:
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
baileyman
Posts: 1053
Joined: Fri Mar 23, 2018 11:33 pm

Re: Clean those inners

Post by baileyman »

Yesterday I had a rattle in my slide. What the heck? Upended the outer and knocked it on the floor a bit--nothing. Still rattled around 1-2. Took it off again and a Phillips head hex bit came out! Must've gotten caught in the mouthpiece shank in my pocket.
User avatar
DaveAshley
Posts: 184
Joined: Wed Aug 01, 2018 9:37 pm
Location: Kentucky

Re: Clean those inners

Post by DaveAshley »

And the slide crook, too! It’s a reservoir for all kinds of stuff.

Snake the outer slide with some white vinegar from time to time…
User avatar
Kingfan
Posts: 1232
Joined: Wed Apr 11, 2018 8:32 pm
Location: Cleveland, OH

Re: Clean those inners

Post by Kingfan »

Bought a King 3B off a guy who was retiring from music. I played with him weekly, and he said he practiced daily. This is what i found.
slide cleaning 2.jpg
You do not have the required permissions to view the files attached to this post.
I'm not a complete idiot, some parts are still missing! :D
Greg Songer
King 606, DE LT101/LTD/D3
King 4B-F: Bach 5G Megatone gold plated
Mamaposaune
Posts: 495
Joined: Sat Sep 22, 2018 12:48 pm
Location: Central Jersey

Re: Clean those inners

Post by Mamaposaune »

Kingfan wrote: Sun May 26, 2024 4:44 pm Bought a King 3B off a guy who was retiring from music. I played with him weekly, and he said he practiced daily. This is what i found.
slide cleaning 2.jpg
Uuuggg! Hope you got all the gunk out of the inners and outers, and poured in some isopropyl alcohol afterwards before playing it.
Didn't Bill Watrous get something similar out of Kai Winding's horn during a gig? I remember him saying the blob sat on the floor for a few moments while everyone just stared, and then it started to wiggle...🤮
izMadman
Posts: 19
Joined: Wed Nov 27, 2019 9:05 am

Re: Clean those inners

Post by izMadman »

ssking2b wrote: Fri May 24, 2024 9:03 am I run a Brass Saver thru mine every day. I don't like any build up.
I couldn't be you, at least space the Brass Saver every couple of days, too much work for me.
User avatar
tbdana
Posts: 737
Joined: Sat Apr 08, 2023 5:47 pm

Re: Clean those inners

Post by tbdana »

Mamaposaune wrote: Mon May 27, 2024 8:46 am Didn't Bill Watrous get something similar out of Kai Winding's horn during a gig? I remember him saying the blob sat on the floor for a few moments while everyone just stared, and then it started to wiggle...🤮
Watrous told a lot of stories. Maybe half of them were true. :D
tbonesullivan
Posts: 1615
Joined: Tue Jul 02, 2019 9:06 am
Location: New Jersey
Contact:

Re: Clean those inners

Post by tbonesullivan »

Mamaposaune wrote: Mon May 27, 2024 8:46 amDidn't Bill Watrous get something similar out of Kai Winding's horn during a gig? I remember him saying the blob sat on the floor for a few moments while everyone just stared, and then it started to wiggle...🤮
I seem to recall hearing a story about how Kai Winding had to borrow a trombone because some gunk came off and clogged his slide. Ahh.. the good old days.

Before a doctor actually confirmed that having a healthy bacterial / fungal ecosystem in your slide could actually cause respiratory illness. I keep em clean, and I try to always brush my teeth before playing and rinse out well. I have enough trouble keeping the goo out without adding potential food sources to the mix.
David S. - daveyboy37 from TTF
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
Macbone1
Posts: 408
Joined: Tue Oct 01, 2019 1:17 pm
Location: Massachusetts

Re: Clean those inners

Post by Macbone1 »

Simplest thing for me is one of those silk cloths on the end of a weighted string that are sold to use on woodwinds.
Buy the smallest one, it will work great on anything from a bass trb to a 2B. Quick, easy and thorough. You may have to add some string to make it long enough.
King Jiggs 2BL
Olds Opera
Besson Sovereign Bb/F bass
Holton bass trumpet
B&H Imperial shepherd's crook cornet
Posaunus
Posts: 3967
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: Clean those inners

Post by Posaunus »

The HWP Brass-Saver can be pulled through the inner slide (even the upper, with leadpipe) without doing any harm. It may take a couple of passes (wipe the brush dry between passes) to remove all the moisture (and gunk) - just look inside the slide to enure it's shiny and dry.

The best thing about the Brass-Saver is that you can similarly pull it through the entire outer slide - including the slide crook - to ensure removal of most moisture and any "debris." [I follow the Brass-Saver with a Slide-O-Mix towel sheath to ensure total dryness.]

I follow this hygiene protocol (often daily) regularly for each of my trombones. My slides are superb!
User avatar
harrisonreed
Posts: 5222
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Clean those inners

Post by harrisonreed »

An alternative method to cleaning the inners:

[media]https://youtube.com/clip/UgkxSo999PAvLo ... ure=shared[/media]
OneTon
Posts: 666
Joined: Tue Nov 02, 2021 11:44 am

Re: Clean those inners

Post by OneTon »

Dat gross.
Richard Smith
Wichita, Kansas
User avatar
ssking2b
Posts: 406
Joined: Sat Sep 29, 2018 1:34 pm
Location: Richmond, VA metropolitan area
Contact:

Re: Clean those inners

Post by ssking2b »

Posaunus wrote: Tue May 28, 2024 9:55 am The HWP Brass-Saver can be pulled through the inner slide (even the upper, with leadpipe) without doing any harm. It may take a couple of passes (wipe the brush dry between passes) to remove all the moisture (and gunk) - just look inside the slide to enure it's shiny and dry.

The best thing about the Brass-Saver is that you can similarly pull it through the entire outer slide - including the slide crook - to ensure removal of most moisture and any "debris." [I follow the Brass-Saver with a Slide-O-Mix towel sheath to ensure total dryness.]

I follow this hygiene protocol (often daily) regularly for each of my trombones. My slides are superb!
Excellent! I do the same and my slides are to die for!
===============================================
XO Brass Artist - http://www.pjonestrombone.com
===============================================
Posaunus
Posts: 3967
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: Clean those inners

Post by Posaunus »

ssking2b wrote: Fri May 31, 2024 8:33 am
Posaunus wrote: Tue May 28, 2024 9:55 am The HWP Brass-Saver can be pulled through the inner slide (even the upper, with leadpipe) without doing any harm. It may take a couple of passes (wipe the brush dry between passes) to remove all the moisture (and gunk) - just look inside the slide to enure it's shiny and dry.

The best thing about the Brass-Saver is that you can similarly pull it through the entire outer slide - including the slide crook - to ensure removal of most moisture and any "debris." [I follow the Brass-Saver with a Slide-O-Mix towel sheath to ensure total dryness.]

I follow this hygiene protocol (often daily) regularly for each of my trombones. My slides are superb!
Excellent! I do the same and my slides are to die for!
A fellow anal-compulsive! :good:

[But the protocol works! ]
User avatar
ssking2b
Posts: 406
Joined: Sat Sep 29, 2018 1:34 pm
Location: Richmond, VA metropolitan area
Contact:

Re: Clean those inners

Post by ssking2b »

Posaunus wrote: Fri May 31, 2024 10:03 am
ssking2b wrote: Fri May 31, 2024 8:33 am

Excellent! I do the same and my slides are to die for!
A fellow anal-compulsive! :good:

[But the protocol works! ]
Wello maybe, but I'm happy and my slides are tops. Even the Slide Doctor says there's not much cleaning to be done when he gets one of mine to work on.
===============================================
XO Brass Artist - http://www.pjonestrombone.com
===============================================
Post Reply

Return to “Maintenance”