Replacement inners for Conn 6H

gregwaits · Post by **gregwaits** » Thu Apr 18, 2024 6:42 pm

Looking for a source for inner slide tubes to replace worn ones on Conn 6H (.500 bore of course)

Trav1s · Post by **Trav1s** » Thu Apr 18, 2024 6:51 pm

I thought Allied had them. Sacrifice a vintage 77H slide to appease the 6H gods?

Blabberbucket · Post by **Blabberbucket** » Thu Apr 18, 2024 10:49 pm

Allied and Conn-Selmer will both have suitable inner tubes. Any technician will be able to source appropriate parts.

greenbean · Post by **greenbean** » Thu Apr 18, 2024 10:52 pm

Allied has several other .500 inner tubes that would work, too, if the Conn ones are unavailable. Yamaha, too.

WGWTR180 · Post by **WGWTR180** » Fri Apr 19, 2024 12:27 pm

Just make sure that the outer dimensions on the inner tubes match the outer dimensions of the original tubes. One would think any .500 bore tube would BUT that might not be the case. Compression has to be taken into account as well.

Post by **Bonearzt** » Sat Apr 20, 2024 8:52 am

Blabberbucket wrote: ↑Thu Apr 18, 2024 10:49 pm Allied and Conn-Selmer will both have suitable inner tubes. Any technician will be able to source appropriate parts.

Allied sources them from Conn-Selmer, who unfortunately doesn't show any in stock at the moment.

Blabberbucket · Post by **Blabberbucket** » Sat Apr 20, 2024 3:40 pm

Bonearzt wrote: ↑Sat Apr 20, 2024 8:52 am
Blabberbucket wrote: ↑Thu Apr 18, 2024 10:49 pm Allied and Conn-Selmer will both have suitable inner tubes. Any technician will be able to source appropriate parts.
Allied sources them from Conn-Selmer, who unfortunately doesn't show any in stock at the moment.

No surprise there.

There are plenty of other options for .500 bore inners with appropriately sized stockings, and the option to replace both inners and outers for appropriate clearances. Again, the tech doing the work will most likely be able to source parts to accommodate the needs of the player.

Slidehamilton · Post by **Slidehamilton** » Sat Apr 20, 2024 6:40 pm

I bought Conn 100H tubes. They look good. It was Bruce Belo's suggestion. I haven't soldered them in yet, but I know that are a good choice. I got them from Allied.

gregwaits · Post by **gregwaits** » Sat Apr 20, 2024 9:30 pm

Slidehamilton wrote: ↑Sat Apr 20, 2024 6:40 pm I bought Conn 100H tubes. They look good. It was Bruce Belo's suggestion. I haven't soldered them in yet, but I know that are a good choice. I got them from Allied.

Thanks Bill. I’ve budgeted a slide rebuild. Please let me know the results.

Tbarh · Post by **Tbarh** » Mon Apr 22, 2024 12:50 am

Jürgen Voigt in Germany do excellent work at reasonable prices.. Remember to Get the right diameter for the stocking (stiefel in German

)

Replacement inners for Conn 6H

Replacement inners for Conn 6H

Re: Replacement inners for Conn 6H

Re: Replacement inners for Conn 6H

Re: Replacement inners for Conn 6H

Re: Replacement inners for Conn 6H

Re: Replacement inners for Conn 6H

Re: Replacement inners for Conn 6H

Re: Replacement inners for Conn 6H

Re: Replacement inners for Conn 6H

Re: Replacement inners for Conn 6H