King 3bf Attachment Tuning

[Trombola2112]

Recently acquired a 3bf that's been a great "do all" horn. One thing I'm curious about is why are there 2 tuning slides on the f-attachment. The only other trigger horn I've had is an open wrap, so this is new to me.

[BGuttman]

The King wrap is somewhat unusual. Notice that there are few very sharp bends so they never needed to implement an open wrap.

The double loop design has two slides . The shorter one is to tune the attachment while the longer one is your E Pull. Thus you don't need to retune the F attachment going in and out of E.

[MrHCinDE]

…The shorter one is to tune the attachment while the longer one is your E Pull. Thus you don't need to retune the F attachment going in and out of E.

I use it for this too on the rare occasion I would need an E pull, as well as for convenient access to empty water

[Burgerbob]

I tune with the small one, dump water with the big.

[Trombola2112]

The double loop design has two slides . The shorter one is to tune the attachment while the longer one is your E Pull. Thus you don't need to retune the F attachment going in and out of E.

Interesting, is there any reason they did that on a small bore?

[BGuttman]

The 3B-F, 4B-F, and 5B all use the same design for the F-attachment/. The E-pull would probably be more common on the larger horns, but why make a unique wrap for just one?

[Trombola2112]

Makes sense, no point making a new design when a copy/paste works just as good.

[Blabberbucket]

Not entirely related to what you're asking but kind of tangentially. If you have the brace removed from the main tuning slide, you can switch the valve slides around to have a valve tuned in G, as well. If you do a search on the forum you can find info about modifying King trombones in this way.